Discussion Groups

Simulation Moldflow Insight

Reply
Contributor
klp2kor
Posts: 22
Registered: ‎12-29-2009

Pressure plot

214 Views, 2 Replies
04-29-2013 05:53 AM

Hello,

I am working on a Fill+Pack analysis of an Insert molding. Few electrical pins (metal) are insert molded during molding. I want to measure the pressure exerting on the metal pins during molding. I need this value for further structural simulation.

So, from "Pressure XY" plot I plotted a graph for few nodes on the insert surface. Is it the right value of pressure exerting on the metal insert ? 

 

I am asking this because the explanation of "Pressure" and "Pressure gradient" in AMI help confused me.

 

regards,

KL

Please use plain text.
New Member
cookp
Posts: 1
Registered: ‎06-04-2013

Re: Pressure plot

06-04-2013 07:28 PM in reply to: klp2kor

Yes, you can use the XY pressure plot to find pressure on inserts.

To improve our Help, can you tell us more about what help page you looked at, and what was confusing.

 

 

 

 

Please use plain text.
Mentor
madhukeshwart
Posts: 263
Registered: ‎03-18-2009

Re: Pressure plot

06-05-2013 07:04 PM in reply to: klp2kor

In AMPI, you need map pressure or temperature results to a mold mesh surface for export to ANSYS for core deflection analysis.

 

Call your local autodesk tech support. They will help you

Madhukeshwar Talwar
FIAT-CHRYSLER ATC, Chennai
mail: madhukeshwart@gmail.com
09600060862
======================================
Please use . Accept as Solution and Give Kudos as appropriate to further enhance these forums. Thank you! .....
Please use plain text.