Discussion Groups

Simulation Moldflow Adviser

Reply
New Member
sabchebil
Posts: 1
Registered: ‎01-17-2013
Accepted Solution

problem export

418 Views, 2 Replies
01-18-2013 12:14 AM

hello

how can I export circuit water and cooling circuit 3D CAD to Moldflow advise 

is that there is another software that can export the original circuit without building

I try with extension. igs I spend a lot of time to convert the online channel

Please use plain text.
Product Support
nordhb
Posts: 453
Registered: ‎03-23-2009

Re: problem export

01-23-2013 02:02 AM in reply to: sabchebil

Hi,

the geometry for cooling circuits in Adviser are 1D-beam elements, generated from curves/lines.
The workflow is to create the center line/curves in cad system, and export in iges format, and then import to Adviser.
See Help:
Modeling > Cooling system > Import and export >

When importing an *.igs or *.iges file, the process will import each segment of the cooling system as a centre or axis line, and apply default cooling channel dimensions. Baffles and bubblers are converted into cooling channels, and these elements will need to either be defined or added manually after import.

To import
Click  Geometry tab > Cooling System panel > Import Channels.

Regards,

Berndt



Berndt Nordh
Please use plain text.
Member
fisseha
Posts: 3
Registered: ‎04-14-2014

Re: problem export

04-14-2014 09:20 PM in reply to: sabchebil

Hello,

 

I have design a bufflor type cooling channel on Solidworks. But i am totally unable to transport it to moldflow. I tried all the optios as per the help info in moldflow. specially .adv or .udm or how to export an axis even. Any help please?

 

Fisseha

Please use plain text.