Discussion Groups

Simulation Moldflow Adviser

Reply
New Member
smc1013
Posts: 2
Registered: ‎07-30-2009

Question concerning Moldflow Adviser 2010

274 Views, 2 Replies
07-30-2009 09:55 AM
Hello,

I have technical question concerning the software for Moldflow Adviser 2010. When running an analysis in moldflow there are some options that can be selected for filling your part. Such as running the analysis in automatic, running by what the modeling window requires, or putting in your own values for mold and melt temperature etc.

My question is when you run your analysis in automatic, how does the software come up with those results. What does it base it from? How does it deifier a fill time, pressure, etc?


The reason I ask is because when you run the analysis using the modeling window results, and make a copy of the part, and then run it in automatic. Of course the results, such as fill time, are a little off. So I am wondering why, and if running in automatic is even useful.
Please use plain text.
Employee
yannick.moret
Posts: 115
Registered: ‎04-28-2009

Re: Question concerning Moldflow Adviser 2010

08-04-2009 07:45 AM in reply to: smc1013
Hi,

If you look in the help , under "Analysis sequence- molding window analysis", you get the explanation on how the solver works.

Regards
Please use plain text.
New Member
smc1013
Posts: 2
Registered: ‎07-30-2009

Re: Question concerning Moldflow Adviser 2010

08-04-2009 08:45 AM in reply to: smc1013
Thank you
Please use plain text.