Simulation Mechanical Forums (Read-Only)
Welcome to Autodesk’s Simulation Mechanical Forums. Share your knowledge, ask questions, and explore popular Simulation Mechanical topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Reply
Message 1 of 5
sudhatam.jain
314 Views, 4 Replies

installation issue

hi

i am inastalling autocad simulation multiphysics 2013 on windows 8 laptop

after extraction of files when run the installer , it doen't starts but in compatibility mode when i run the installer it starts.

after complete installation when i launch the programm i get this message(attachment) and after that it closes.

so pls HELP me

 

ITS VERY URRGENT

4 REPLIES 4
Message 2 of 5
AstroJohnPE
in reply to: sudhatam.jain

Here are the usual suggestions, in no particular order:

 

  1. Update the graphics drivers on your computer.
  2. Create an account where you have full administrator rights.
  3. Instead of clicking or double clicking on the installer, see if there is an option such as "Run as administrator" when you right-click on the downloaded file.
  4. Try a different computer, preferably one with a better graphics card and where you have administrator rights.

There is also a discussion group specifically for installation issues. Look to see if there is a thread that covers your issue, or copy your post to that board as well.

Message 3 of 5
sudhatam.jain
in reply to: AstroJohnPE

i have performed all the steps as told by you
As of i have 2GB nvidia graphic card fully updated
In january 2013, last time i installed the programm, it was working fine but this it is showing the same issue.
Tags (1)
Message 4 of 5
sudhatam.jain
in reply to: AstroJohnPE

i have done all the steps already
and my graphic card is fully updated 2GB nvidia
Message 5 of 5

pls reply

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report