Discussion Groups

Simulation Mechanical and Multiphysics

Reply
Active Member
tareq.me.kuet
Posts: 7
Registered: ‎07-06-2012

Multiphase Flow Simulation in autodesk

287 Views, 2 Replies
07-14-2012 06:18 PM

I would really appreciate  some help in here.As my project has the invovement of hot air jet impingement on an iced surface(related to deicing of aircraft) i really want to know is it possible to do multiphase flow simulation on autodesk  simulation multiphysics/cfd.

i checked some brochure but i am not sure. Please tell me Autodesk simulation has the  capability of simulating multiphase flow or not.

i will look for an early reply.

thanks to all of you.

Please use plain text.
Employee
Joey.X
Posts: 259
Registered: ‎06-14-2010

Re: Multiphase Flow Simulation in autodesk

07-16-2012 05:55 AM in reply to: tareq.me.kuet

Depending on the physcal problem and assumption, if there are density changes (or multiple conbination of multiple fluid matrials) in hot air jet impingement problem, SIM-MP will not handle it, you can check SIM-CFD product.

 

Jianhui Xie, Ph.D
Principal Engineer
MFG-Digital Simulation
Please use plain text.
Active Member
tareq.me.kuet
Posts: 7
Registered: ‎07-06-2012

Re: Multiphase Flow Simulation in autodesk

07-17-2012 11:28 AM in reply to: tareq.me.kuet

Thanks

Please use plain text.