Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Why is the SDV1 is dependent on the time step and the boundary condition?
Why is the SDV1 is dependent on the time step and the boundary condition?
For the 45 degree orientation in woven composites, SDV1 = 2.8 which means complete matrix failure and failure in fill tows, the failure occurs in SDV3 and SDV5 both which means complete failure of fiber ans matrix, and that's wrong!
If I am understanding your statement correctly that could be an issue. Are you saying SDV3=1.0 and SDV5=1.0 and SDV1=2.8. Could you share your model and result files.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")