Discussion Groups

Simulation CFD

Reply
Member
engr_jake1925
Posts: 4
Registered: ‎08-01-2013

Smoke Simulation

244 Views, 6 Replies
08-15-2013 09:49 PM

Hi Everyone,

 

Is there anybody who do a smoke simulation here? Can you share it? What are the parameters or how did you do it?

I'm new in Simulation CFD and know just some of the basics. I want to do a smoke simulation for atrium or carpark maybe.

Hope someone of you can help me/teach me in this.

Thank you very much.

 

 

John

 

Please use plain text.
Product Support
Royce_adsk
Posts: 554
Registered: ‎08-24-2011

Re: Smoke Simulation

08-16-2013 06:52 AM in reply to: engr_jake1925

Hi John,

 

I would suggest that you look at the Smoke Visibility guidelines as a place to start.

 

Do you have any CFD experience to build onto to start doing smoke studies or just new to Autodesk Simulation CFD?



Royce Abel
Please use plain text.
Member
engr_jake1925
Posts: 4
Registered: ‎08-01-2013

Re: Smoke Simulation

08-16-2013 08:15 AM in reply to: engr_jake1925
Hi royce,

Thanks for the reply. I already looked into that guidelines and it quite helpful, but i haven't tried in actual project that's why i'm hoping someone here already tried a real smoke simulation.

Btw, i took a 3 days training for simulation cfd and i already did some actual projects like staircase pressurization and warehouse airconditioning but they are all basics simulation only that's why i considered myself as a beginner in sim cfd.

Please use plain text.
*Expert Elite*
Dan.M
Posts: 588
Registered: ‎01-19-2009

Re: Smoke Simulation

08-18-2013 11:38 AM in reply to: Royce_adsk
Hi
There was a smoke webinar that you guys did once.
maybe you can post the link here.
Dan
Please use plain text.
*Expert Elite*
Dan.M
Posts: 588
Registered: ‎01-19-2009

Re: Smoke Simulation

08-18-2013 11:43 AM in reply to: engr_jake1925

I have some pictures that help me with the setup:

 

Dan

Please use plain text.
Member
engr_jake1925
Posts: 4
Registered: ‎08-01-2013

Re: Smoke Simulation

08-18-2013 09:06 PM in reply to: Dan.M

Hi Dan,

 

Thank you very much for the info, i will try this and hope i can get a good result.

 

btw, i noticed that you took the picture from a video, is it possible for you to share that video? if that's okay with you.

 

Thanks a lot.

 

 

Please use plain text.
*Expert Elite*
Dan.M
Posts: 588
Registered: ‎01-19-2009

Re: Smoke Simulation

08-19-2013 01:11 AM in reply to: engr_jake1925
Hi
I don't have this video. i saw it once before Autodesk bought Cf Design.
I took some pictures because I knew this is important.
The guys from Autodesk may have it.
Post your smoke results here, and will try to help.
Dan
Please use plain text.