Discussion Groups
New Idea
2 Kudos
eyaln

adding flags to change the tolerance

Status: New Idea
by eyaln on ‎07-22-2014 01:59 AM

I am working with BIG models ( BIG Buildings )

Starting the model in Revit and launcing the CFD directly.

I happend many times that I am not able to close the internal volums and afer many many hours I found few gaps of about 1 mm ,

In the construction arena with 100 m long building and wall width of 20 cm I do not care about 1 mm gape.

I am looking for a flag that I will be able to indicate the minimal gap to close the internal volume to be 1 cm.

 

Regards

Yuval

12 Kudos
dkusmer

Can the "Points" window be expanded?

Status: New Idea
by Contributor dkusmer on ‎06-10-2013 01:56 PM

Apparently the "Points" window is a fixed window. It would be nice if it was expandable so the full "Name" description can be seen (see diagram below)?

 

Thanks, Dan

 

Points window.png

 

 

See...Can the "Points" window be expanded? ...in the Autodesk Simulation CFD discussion group for more information.

10 Kudos
kaiwei

Velocity Wind Profile

Status: Solution Provided
by Active Contributor kaiwei on ‎01-09-2013 01:45 AM

Hi,

May I request that a Velocity Wind Profile be implemented in the next 6 months? This is required for the AEC industry in Singapore. Thank you.

Status: Solution Provided
Thanks for providing feedback. Please check out the new spatially varying boundary conditions in CFD 2015 and let us know what you think.
2 Kudos

Hi,

 

There are customers that would be interested in Sim CFD if you could incorporate the code for DOE2 for building energy analysis into Autodesk Simulation CFD.

 

The code is free and can be found at the link below.

 

Thank you.

 

References

http://doe2.com/

0 Kudos

Currently, if I move the CFD interface to a separate screen and press 'Solve' for instance, the window might (usually will) appear back on my other screen. Can we not have a default option where everything is maintained within the interface?

Announcements
IdeaStation Guidelines
Review guidelines and best practices
before posting a new idea.

Labels