Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Looks like there is a lot of interest in this one. For those that think this would be helpful, is it specifically velocity you are interested in varying or are there other conditions you need to vary over a surface?
Also, if you can comment on the design we have implemented in Project Falcon that would be helpful so that we can better understand what you are looking for. This video shows a wind profile input at 01:50:
The request is for a wind velocity profile that adheres to logarithmic law. For more information in regards to the velocity wind profile, please refer to section C3: Ventilation Simulation Methodology at the following link. http://www.bca.gov.sg/Envsuslegislation/others/GM_Certification_Std2012.pdf Thank you.
According to all international normes, the other key parameter that should change with height, alongwith velocity to build the logarithmic profile, is the turbulence intensity.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")