Discussion Groups
New Idea
1 Kudo

Just downloaded 2015 … saw the same big appetite for TCP ports.  As previously observed and discussed, Simulation Job Manager (SJM) opens a  port for each little file (~5 KB) and I believe this is the primary contributor to the lack of robustness and the lack of speed.

 

I looked forward to 2015 as I thought SJM might get SPDY (as in SPeeDY)?  SPDY is a technology that is seemingly tailor made for SJM as it allows multiple SSL file transfers over the same connection, as well as server push and prioritization.  SPDY development began in 2009 and it is now mature, open source code that's widely used in many client-server platforms, in every major web browser, and on many websites.  It's probably telling that Autodesk.com is not one of those sites ( http://spdycheck.org/#autodesk.com ), so it seems SJM is not the only internet code and platform at Autodesk that has not adopted new web technologies which simultaneously enhances performance and security.

 

Below is an excerpt discussing performance impacts of eliminating SSL negotiation and connection time.  Also, there is the question of a CDN, and of course SJM uses Akamai so this may be applicable.

 

…”These results blew my mind. We are seeing the great SSL negotiation times. Then, for items 2-15 (our assets), there is no additional SSL negotiation or connection times. SPDY’s HTTP multiplexing is allowing all of these request to occur over the same TCP connection. We do not need to make additional connections or SSL negotiations. All of the items on the page are loaded in just over 900ms, which is outstanding (yes, that’s faster than the old site, but the server is also closer).

Also notice, that there is less diagonal flow to this waterfall. This shape is due to how SPDY allows multiple HTTP requests over the same TCP connection. It is important to note that while using the CDN, we received no benefit from SPDY. By removing the CDN, we start to see the benefit of reusing a TCP connection and SSL negotiation. 

Clearly, SPDY is providing a huge benefit for us here. While we lose the 70-90ms in SSL negotiation, we save so much time in not creating more connections due to HTTP multiplexing.”

https://thethemefoundry.com/blog/why-we-dont-use-a-cdn-spdy-ssl/

 

SPDY (pronounced speedy) is an open networking protocol developed primarily at Google for transporting web content. SPDY manipulates HTTP traffic, with particular goals of reducing web page load latency and improving web security. SPDY achieves reduced latency through compression, multiplexing, and prioritization. The name "SPDY" is a trademark of Google and is not an acronym.

As of July 2012, the group developing SPDY has stated publicly that it is working toward standardisation (available as an Internet Draft). The first draft of HTTP 2.0is using SPDY as the working base for its specification draft and editing.

Implementations of SPDY exist in ChromiumMozilla FirefoxOperaAmazon Silk, and Internet Explorer.

http://en.wikipedia.org/wiki/SPDY

4 Kudos

It would be great to view sim 360 job status online, as well as some static images of results.

3 Kudos
derrek.cooper

Leveraging SIM360 for optimization

Status: New Idea
by Employee derrek.cooper on ‎10-31-2012 05:07 PM

Ive spoken to a number of users that have asked for more optimization capabilities. The 360 offering seems ideally suited to eliminate some of the long solution times required by optimization as well as some of the IT infrastructure of running multiple simulations.

 

All of the above can be addressed w. SIM360, but it has to be uber simple and a natural extension of what simulation is today. I dont believe people are looking for complex optimization algorithms to choose from, rather implement it in such a way that the software inherently tries/suggests alternatives.

1 Kudo

local mesh control

Status: New Idea
by Employee Tomi-Autodesk on ‎02-13-2013 11:47 AM

User would like to get more visual help and mesh information when they are setting (over-riding)  the local mesh sizes- something like the average mesh size on a chosen entity (face, edge,..) would help- also some quick visual feedback around that area (for example show the chosen element length on the surrounding edges) would be very nice as well- 

0 Kudos

default solver

Status: New Idea
by alain.benchissou on ‎03-07-2014 06:10 AM

Hi,

 

 

We would like be able to define a local solver type

     - whether cloud

     - whether locale

 

 

Actually on the Sim 360 Pro, if you want  to use the locale one, a manipulation is needed - and so be able to define a default one could fix this.


Thanks

0 Kudos
Royce_adsk

Support Wall Calculator for Motion Bodies

Status: New Idea
by Product Support Royce_adsk on ‎11-19-2013 09:09 AM

Currently, when using motion (like linear motion) you cannot use the wall calculator on those bodies.   It would be great if we could use the wall calculator on those bodies, especially the force calculation.

0 Kudos

Sim 360 "Results Extraction -CFD"

Status: New Idea
by Active Contributor ajay.s on ‎10-30-2013 12:46 AM

Dear Cloud Users,

 

It would be advantageous with following features,

 

1. if SIM 360 can import loads from file (eg. Desktop CFD results to be imported)

2. If SIM 360 can have option for Database Translation  (so that, results like(.csv)/(nodeFEA.xyz) can be imported into Desktop CFD)

3. Also, Easy/direct trasnfer of Pressure/Temp results from CFD to Mech (Bi-directional) with SIM 360Pro.

 

Many Thanks

 

Regards,

Ajay.S

Simulation Engg. 

0 Kudos

Allow jobs to be ported to another machine.

0 Kudos
Royce_adsk

Display Available Job Credits in SJM

Status: New Idea
by Product Support Royce_adsk on ‎02-22-2013 09:43 AM

Currently the user has no idea how many credits are available unless they communicate with the contract manager.  It would be useful for them to know how many credits are remaining more up front.