Hello,
i am having problem with walls design.
i run the program with all needs, the results are OK, when i select one wall an use the Wall Design Option it takes the walls but not all loads.
i have done this before and worked. i used different structural buildings to compare, and nothing is missing.
i have robot 2011 ans SP6
Any chance to upload the rtd file?
i can not attach the file. too large.
can you send me a structure with a foundation slab a normal slab.
and 2 walls designed?
with the example, then i can compare mine.
regards,
It seemed to me that this was a problem in your model.
But therefore it is not more justified you try to upload a file anyway?
File can be without the results and compressed.
Please try to save it also with new name.
i did the compressed file, but still 17.3 mb
in Zip mode, and the web does not allow me to upload
when i assgin a wall to a core condition and i named (M1)
in the 3d view how can i present the name of the wall (related to Core) i can do it with panel number, etc with the display module.
and i can put color to the core walls, but no named..
exist a command to do it?
i am attaching a jpg file, i can show only the color, not the core name. when i print the paper, the color near name is difficult to read a do a relation with the picture.
regards
Well, I do not think that file saved without results as new name might be so huge after compression.
Something has to be contrary to my instruction.
I am affraid that there is no other option to mark the core walls after the composing walls into a CoreWall group.
Only legend formatting lets you to present the relation between panel elements on view and the name of defined CoreWall.
Can't find what you're looking for? Ask the community or share your knowledge.