Hi.
I am trying to model a suspension bridge (attached) and simply cannot get the model to converge. I have tried changing the analysis parameters and cable definitions. Nothing so far has worked.
Could somebody give me a hint how to solve this problem.
Cheers,
Cornelia
This model is way too strange!!!
1- Bridge is on XY plane , gravity applied on -Y . Ok ,but not common
2- Main columms above deck level are UC 305x305x97 and are 150m long!!!
3- Transversal girders (UB305x165x40 and columms below deck have no material assigned
4- Main deck girders are rectangles of solid steel 4,72m x 1,00m !!!
I guess you have to correct lots of things before thinking about convergence!!
Rafael Medeiros
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Hi.
Thanks for the quick reply.
The example is just a theoretical study of performance.
Depised all of the points you mentioned.
How does one get a nonlinear analysis to converge in robot.
I have never experienced this problem in Abqua.