Discussion Groups

Robot Structural Analysis

Reply
Member
M.G.L.
Posts: 5
Registered: ‎12-29-2013
Accepted Solution

"Inconsistent meshes around edges" error in model

351 Views, 8 Replies
12-29-2013 02:33 AM

Hi,

 

I'm having trouble with regards to meshing, I keep on getting the "Inconsistent meshes around edges" error. Hope anyone could advice me on this matter. 

 

Thanks! 

Please use plain text.
Distinguished Contributor
muhannad_91
Posts: 145
Registered: ‎08-06-2013

Re: "Inconsistent meshes around edges" error in model

12-29-2013 09:50 AM in reply to: M.G.L.

Correct the mesh
original.jpg

Please use plain text.
Member
M.G.L.
Posts: 5
Registered: ‎12-29-2013

Re: "Inconsistent meshes around edges" error in model

01-01-2014 05:37 PM in reply to: muhannad_91

I did as mentioned above and some additional steps. 

 

I got no more errors but 6 warnings, 2 of which say "Incoherent mesh on edges" and "Error - object meshing". I attached a file showing all the warnings. Any suggestions in correcting these?

 

Thank you very much!

Please use plain text.
Product Support
Rafal.Gaweda
Posts: 5,005
Registered: ‎04-26-2010

Re: "Inconsistent meshes around edges" error in model

01-01-2014 11:41 PM in reply to: M.G.L.
Robot file please.


Rafal Gaweda
Please use plain text.
Member
M.G.L.
Posts: 5
Registered: ‎12-29-2013

Re: "Inconsistent meshes around edges" error in model

01-02-2014 05:09 AM in reply to: Rafal.Gaweda

I used WeTransfer because the file is larger than the 1.5MB limit. Here's the link: http://we.tl/vswbmCKOOu

 

Some panels have no meshes yet, those are the ones that cause incoherence. Thank you!

Please use plain text.
Product Support
Rafal.Gaweda
Posts: 5,005
Registered: ‎04-26-2010

Re: "Inconsistent meshes around edges" error in model

01-02-2014 08:23 AM in reply to: M.G.L.

I wish you have paid more attention while creating model., esspecially sloped elements and elements connected to them.

 

inco.jpg

 

 



Rafal Gaweda
Please use plain text.
Member
M.G.L.
Posts: 5
Registered: ‎12-29-2013

Re: "Inconsistent meshes around edges" error in model

01-02-2014 05:59 PM in reply to: Rafal.Gaweda

Thanks for the advice, Rafal. Sorry about that, auto-snap was the culprit.   

Please use plain text.
Product Support
Rafal.Gaweda
Posts: 5,005
Registered: ‎04-26-2010

Re: "Inconsistent meshes around edges" error in model

01-03-2014 01:10 AM in reply to: Rafal.Gaweda

Have fun : http://we.tl/Hfue7VOv0e

Do not unfreeze panels.



Rafal Gaweda
Please use plain text.
Member
M.G.L.
Posts: 5
Registered: ‎12-29-2013

Re: "Inconsistent meshes around edges" error in model

01-03-2014 06:21 PM in reply to: Rafal.Gaweda

Thank you very much Rafal!

Please use plain text.