hi
i made tow simple models tow columns ,one beam and a slab but i used offset in one of them the there were a big differance in the results see attatched image
Solved! Go to Solution.
Solved by Artur.Kosakowski. Go to Solution.
This is as expected because the stiffness of the slab with beam with the offset is larger than the one with no offset. In addition use of offset causes generation of large axial force in the beam and reduces its bending. See:
http://forums.autodesk.com/t5/Autodesk-Robot-Structural/T-slab/m-p/3185418
http://forums.autodesk.com/t5/Autodesk-Robot-Structural/Beam-offsets/m-p/3332921
If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.