If I define a load combination
LIVE=(LL1 + LL2)
and in load types I assign "live" nature to it; when I try to manualy create a combination, say
COMB1 = 1.6 LIVE
and the load factor for "live" is set to 1.6 in the load factor table; ifI select LIVE from the "case list" column and transfer it to "List of cases in combination" column; RSA assigns a factor of 1.0 instead of a 1.6.
Seems to me that RSA does not recognize the nature of the load combination LIVE.
How do I assign the "live" nature to a combination?
Solved! Go to Solution.
This should not happen unless you define SLS combination type rather than ULS (1.0 is the default factor for SLS combinations for all loads). I indicated the steps for EC regulation on the attached picture. Mind taht at any moment you can overwrite the default load factor with the 'needed' one.
If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.