Hello,
I want to apply an hydrostatic pressure, water high is 5.1m; helpbut i don't get what expexted.
I get max pressure on the high edge and the minimal pressure in the lower egde
Any help will be appreciated.
Solved! Go to Solution.
Solved by Rafal.Gaweda. Go to Solution.
I want to apply an hydrostatic pressure, water high is 5.1m; helpbut i don't get what expexted.
I get max pressure on the high edge and the minimal pressure in the lower egde
Examle settings below.
If it is not the case plese send us model.
Thanks rafal for quick reply,
It's exactly whati did, but the result is not like your picture. So please find my model
No you did not :-).
http://docs.autodesk.com/RSA/2013/ENU/filesROBOT/GUID-F17A8407-DE47-44A2-857E-1AE946B8385F.htm
.......
z - The coordinate of an arbitrary point in the selected direction (in this case, the variable z was selected from the global coordinate system