Discussion Groups

Robot Structural Analysis

Reply
Valued Contributor
pevelor
Posts: 98
Registered: ‎12-12-2011
Accepted Solution

Slab reinforcement - extreme values

289 Views, 4 Replies
06-24-2012 06:04 AM

Hi

 

I just have a quick question. How come I get some extreme values on random places on the slab I am calculating?Slab - top reinforcement



Please use plain text.
Product Support
Rafal.Gaweda
Posts: 5,008
Registered: ‎04-26-2010

Re: Slab reinforcement - extreme values

06-24-2012 11:37 PM in reply to: pevelor

Under point loads, over supports, columns...

Or send us file to check.



Rafal Gaweda
Please use plain text.
Valued Contributor
pevelor
Posts: 98
Registered: ‎12-12-2011

Re: Slab reinforcement - extreme values

08-23-2012 01:05 AM in reply to: Rafal.Gaweda

Hi again.

 

I have figuered out that the extreme values are caused by reinforcement change for cracks.

When I choose the option 'none' under Minimum reinforcement I do not get these values.

 

How can I fix my results without loosing the possibility to see the min. reinforcement area for cracks?

 

SLS_parameters.pngReinforcement.png

 

Regards

Peder

Please use plain text.
Product Support
Rafal.Gaweda
Posts: 5,008
Registered: ‎04-26-2010

Re: Slab reinforcement - extreme values

08-23-2012 01:24 AM in reply to: pevelor

Check if there is tension in such point. If so there are different min reinf formulas for bending and tension.



Rafal Gaweda
Please use plain text.
Valued Contributor
pevelor
Posts: 98
Registered: ‎12-12-2011

Re: Slab reinforcement - extreme values

08-23-2012 01:47 AM in reply to: Rafal.Gaweda

Thanks so much. I should have figured:-)

Please use plain text.