Robot Structural Analysis

Robot Structural Analysis

Member
Posts: 5
Registered: ‎02-06-2012
Message 1 of 8 (335 Views)

ROBOT-Results-detailed analysis

335 Views, 7 Replies
06-25-2012 08:46 PM

I have 2 questions regarding the detailed analysis function in ROBOT, refer to attached.

Distinguished Contributor
Posts: 125
Registered: ‎09-14-2011
Message 2 of 8 (330 Views)

Re: ROBOT-Results-detailed analysis

06-25-2012 10:09 PM in reply to: luoxy
What questions did you have?
Member
Posts: 5
Registered: ‎02-06-2012
Message 3 of 8 (328 Views)

Re: ROBOT-Results-detailed analysis

06-25-2012 11:39 PM in reply to: bjur

thx bjur for your kind attention, sorry probably i didn't make myself clear, the question is in the attached pdf file.

Product Support
Posts: 3,608
Registered: ‎12-17-2010
Message 4 of 8 (324 Views)

Re: ROBOT-Results-detailed analysis

06-26-2012 12:15 AM in reply to: luoxy

1. Open detailed analysis result dialog

2. File > Screen Capture

3. Open Printout Composition and export the screen capture you made to Word

4. Select the table in Word and copy it to Excel

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

Artur Kosakowski
Active Contributor
Posts: 44
Registered: ‎09-04-2011
Message 5 of 8 (305 Views)

Re: ROBOT-Results-detailed analysis

06-26-2012 01:55 AM in reply to: Artur.Kosakowski

Gents,

There are 2 probems that the provided solutions are not addressing:

1. The Print screen from Luoxy is an envelope of  combinations, so each node should generate a  minimum and maximum member force.
2. Relative characteristic points (at 0.1) do not provide 10 positions and the associated member force.   Only 4 positions and their associated My values are returned.

Isn't there an easy way (besides API) to extract the member forces on any bar at predefined intervals?

Product Support
Posts: 3,709
Registered: ‎04-26-2010
Message 6 of 8 (287 Views)

Re: ROBOT-Results-detailed analysis

06-26-2012 02:21 AM in reply to: RoboExploiter

The crucial thing : press Refresh button

(The same \ similar in ordinary Forces table)

For one case:

For envelope

Rafal Gaweda
Active Contributor
Posts: 44
Registered: ‎09-04-2011
Message 7 of 8 (224 Views)

Re: ROBOT-Results-detailed analysis

07-03-2012 02:24 AM in reply to: Rafal.Gaweda

Ok, thanks Rafal. I  now understand that:

The combinations do work using the Dvision points >> Characteristic points option.  Which requires the user to add point one at a time, and press refresh.

Also, the Dvision points >> N Points along bar length can generate member forces along the entire length for a single load case.

However,

Dvision points >> N Points along bar length should generate max and min values for an envelope of cases.  But it doesn't.  If I have selected more than one case and N points along bar length = "20", the refresh button is greyed out and hitting apply doesn't generate +ve and -ve values.  Refer to PDF.

Product Support
Posts: 3,709
Registered: ‎04-26-2010
Message 8 of 8 (210 Views)

Re: ROBOT-Results-detailed analysis

07-03-2012 04:13 AM in reply to: RoboExploiter

The combinations do work using the Dvision points >> Characteristic points option.  Which requires the user to add point one at a time, and press refresh.

No, just press Refressh to find all characteristic points on diagram (for one case\comb)

Dvision points >> N Points along bar length should generate max and min values for an envelope of cases.  But it doesn't.

No, pressing Refresh button generates max and min points of single case diagram .

In case of envelope - results from last case from the list are displayed I guess.

Envelope is presented in Forces table.

Rafal Gaweda

Recently Solved