REGULARITY AND OTHER CHECKS ACCORDING TO EN1998-1 WITH ROBOT

[TSOFA]

Hi,

I have a concrete structure and I want to check by Robot if the criteria of regularity, limitation of second order effects and limitation interstorey drifts are satisfied according to EN1998-1. 

Is there any way Robot to run the above mentioned criteria automatically? 

The equations that I want to check are the ones at the paragraphs 4.2.3.3, 4.2.3.2, 4.4.2.2.(2), (3), (4) and 4.4.3.2 (1) of EN 1998-1

I also want to check according to par. 5.1.2 the system that my structure is ( frame system, frame-equivalent dual system etc), hence to calculate if the shear resistance at the building base exceeds 65% or 50% of the whole structural system or to calculate the normal design axial force vd of columns for other possible systems (i.e.. inverse pendulum system)

Thanks 

[Tuctas · Accepted solution]

No, you cannot obtain automatically these parameters of EC8 in Robot, you have to "extract" them manually by using the results of the table of stories...