Robot Structural Analysis Forum
Welcome to Autodesk’s Robot Structural Analysis Forums. Share your knowledge, ask questions, and explore popular Robot Structural Analysis topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Reply
Message 1 of 2
andrea_pontiggia
341 Views, 1 Reply

Project armor

I would like to report a situation: I have a model calculation in the beam (beam element) which rests on walls (plate element). In view of the results, everything is correct, as in the image below.

 

 

Cattura.JPG

 

 

 

When calculating the reinforcement of the beam, the model does not include the actual supports.

 

Cat.JPG

 

 

The calculation of the reinforcement is correct? As you can see the actual constraints?
thanks

 

Andrea
1 REPLY 1
Message 2 of 2

1. Generate meshes on the walls

2. Freeze them

3. Define auxiliary columns in such a way that their bottom nodes do not 'meet' with nodes of the meshes

4. Calculate model and export the beam to the RC Design module

5. Mark columns as supports

 

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.



Artur Kosakowski

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report