Discussion Groups

Robot Structural Analysis

Reply
Contributor
BertelliMarco1095
Posts: 20
Registered: ‎09-14-2010

Parametric SFB

162 Views, 5 Replies
09-17-2013 03:15 AM

Dear all,

I tried to use the parametric definition of SFB composed by hea 200 + a baseplate of 400x15. The moment of inerzia is different from the value calculated with the custom defined section (and also autocad massprop). Have you any idea for this difference?

Please use plain text.
Product Support
Artur.Kosakowski
Posts: 4,544
Registered: ‎12-17-2010

Re: Parametric SFB

09-17-2013 03:20 AM in reply to: BertelliMarco1095

Could you attach the screen captures of the section and the compared values please?



Artur Kosakowski
Please use plain text.
Valued Mentor
t.sautier
Posts: 331
Registered: ‎12-14-2012

Re: Parametric SFB

09-17-2013 05:01 AM in reply to: BertelliMarco1095
if the diffrence is slight, make sure you have exactly the same drawing (i mean including espacially fillet radius); As it is located at the top and bottom of section, it plays more than one could think.
Please use plain text.
Contributor
BertelliMarco1095
Posts: 20
Registered: ‎09-14-2010

Re: Parametric SFB

09-17-2013 07:23 AM in reply to: Artur.Kosakowski

The moment of inerzia are: parametric 8622 cm4 custommade 6684 cm4 difference about 30%

Please use plain text.
Product Support
Artur.Kosakowski
Posts: 4,544
Registered: ‎12-17-2010

Re: Parametric SFB

09-17-2013 08:18 AM in reply to: BertelliMarco1095

Please use the user section rather the parametric one for time being. We will investigate the cause of the difference.



Artur Kosakowski
Please use plain text.
Product Support
Artur.Kosakowski
Posts: 4,544
Registered: ‎12-17-2010

Re: Parametric SFB

10-21-2013 03:42 AM in reply to: Artur.Kosakowski

Please install SP3 for Robot 2014.

 

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.



Artur Kosakowski
Please use plain text.