Robot Structural Analysis Forum
Welcome to Autodesk’s Robot Structural Analysis Forums. Share your knowledge, ask questions, and explore popular Robot Structural Analysis topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Load symbols removed from Structural Model after adding stories to the model

1 REPLY 1
Reply
Message 1 of 2
pta_simon
224 Views, 1 Reply

Load symbols removed from Structural Model after adding stories to the model

I have a model and have applied cladding self weight loads using linear 2p to the structure and the model verification has no errors

 

I have run the calculation before defining the stories and made a note of a nodal reaction and the total reaction from the cladding loads.

 

I have then introduced stories to the building and the load symbols that were present on the structure highlighting where the cladding loadings have been applied disappear.

 

The cladding loads are still present in the load table and the reactions are still the same as they were before defining the stories but why have the load symbols disappeared from the model itself?

1 REPLY 1
Message 2 of 2
dimogrec
in reply to: pta_simon

Try pressing the button shown in picture (stories filter selection), but are you sure you have set stories correctly? You should be able to see at least the loads from the selected-current story...

 

STORY.jpg

Tags (1)

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report