Robot Structural Analysis Forum
Welcome to Autodesk’s Robot Structural Analysis Forums. Share your knowledge, ask questions, and explore popular Robot Structural Analysis topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Integration REVIT <-> ROBOT

16 REPLIES 16
SOLVED
Reply
Message 1 of 17
pevelor
2177 Views, 16 Replies

Integration REVIT <-> ROBOT

Hi

 

I am trying to get update my revit model from robot. Everything is working just fine, except transfer of reinforcement.

What can I do to fix this problem?

 

I update from revit as shown below

revit__-__robot.png

 

I use the following settings

integration_options.png

 

And I get the following message

extension_problem.png

 

And the following error

error.png

 

 

Any help on this matter would be much appreciated:-)

 

In addition, I have not figured out a way to update my robot model from revit. Is this even possible, and if so how is it done?

 

Regards

Peder

16 REPLIES 16
Message 2 of 17
Rafal.Gaweda
in reply to: pevelor

Please upload robot file



Rafal Gaweda
Message 3 of 17
pevelor
in reply to: Rafal.Gaweda

thanks for looking into it.Smiley Happy

 

I cant seem to be able to compress the file enough this time, even without results

Please refer to the followin thread which has the same model: http://forums.autodesk.com/t5/Autodesk-Robot-Structural/Structure-verification/td-p/3334637 -  Ole Deviks vei 6.zip 246 KB

Message 4 of 17
Rafal.Gaweda
in reply to: pevelor

The movie how it works on my side here:

 

https://www.filemail.com/dl.aspx?id=DFBPROFUIDGSNHH

 

NOTE: The issues can be related to reinforcement You generated in Robot.



Rafal Gaweda
Message 5 of 17
pevelor
in reply to: Rafal.Gaweda

Thanks for the video upload.

The prosess you demonstraded is exactly the same as I have done.

So I reinstalled revit which did not help. But when I uninstalled it and intalled it again it works perfectly.

 

Thanks againSmiley Happy

Message 6 of 17
pevelor
in reply to: pevelor

Hi

 

I have a follow up question,

Do you have solution for transfer of wall and floor reinforcement from Robot to Revit?

Message 7 of 17
Rafal.Gaweda
in reply to: pevelor



Do you have solution for transfer of wall and floor reinforcement from Robot to Revit?

Currently it is not possible to transfer plate and walls reinforcement from Robot to Revit.



Rafal Gaweda
Message 8 of 17
Arkamel
in reply to: pevelor

I have the exact same problem i have create a structure and now i cant sent what i did on robot to revit..... pleace help me with the solution.

 

DP. sorry about my terrible english 

Message 9 of 17
Arkamel
in reply to: Arkamel

the message that it trows

Message 10 of 17
Rafal.Gaweda
in reply to: Arkamel

Robot file please.


Rafal Gaweda
Message 11 of 17
alexturbo_
in reply to: Arkamel

This problem was since 2012 and I can't believe that it's still not available sending slab reinforcement from Robot to Revit, Robot is an amazing software, but I think that it's still not complete till all reinforcement and geometry in slabs and walls can be sent to Revit.
Hope the next version 2015 could enhance this issue.

Message 12 of 17
alexturbo_
in reply to: Rafal.Gaweda

Hope the next version 2015 could enhance this issue.

Message 13 of 17
stroxy
in reply to: Rafal.Gaweda

Hi Rafal

Could you please re-upload this movie.  Also are there any settings that must correspond between the 2 programs for this to work seamlessly?

Message 14 of 17
Rafal.Gaweda
in reply to: stroxy

I am afraid I do not have it anymore

 

Check attached doc and

http://forums.autodesk.com/t5/robot-structural-analysis/revit-to-robot/td-p/3812616

 



Rafal Gaweda
Message 15 of 17

hi. @Rafal.Gaweda

Vi deo was deleted. Can you please bring it back? Now is the end of 2019. Is the problem of multi-beam beams when exporting reinforcement from robots to revit already solved?

Message 16 of 17

Hi @ledinhchinh0409

 

I am afraid not.



Rafal Gaweda
Message 17 of 17

Hi @Rafal.Gaweda

So sad : smileysad:. I do not think it's too hard. Maybe Autodesk does not want to make RSA great. The road to BIM was stopped. I also see you less than before: smileysad:

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report