Hello,
For usual loading types (uniform planar loads as exemple) I can modify easily loads parameters using the following tips :
1- Load table -> Table edition -> left clic on the "list" case corresponding to the load I want to modify
2- go to general view -> select new element to apply load by left clik with CTRL button pull on
But I cannot perform the same tips for the "linear load on edges" type
Regarding this type of load, I don't arrive to select only one edge of a pannel
For the moment I must delete all linear loads on edges an rebuild
Is there another enjoying solution ?
You can type edge number in the List field additionally then press Tab or Enter to cofirm change
Hi
What the command to asset the edge number in the list field ?
Do I need to type :
1
_
e
d
g
e
(
2
)
Or there is shortcut ?
If the list field contains many edges from many pannels, this tips makes sometimes mistakes.
If I modify one edge on a list, sometimes I found other loads on edges modified when I come back to the 3D view.
Do you know why?
Do I need to type :
1_edge(2)
Exactly, or in case of applying load to several edges of the same panel like that 1_edge(1 2 4)
If the list field contains many edges from many pannels, this tips makes sometimes mistakes.
If I modify one edge on a list, sometimes I found other loads on edges modified when I come back to the 3D view.
Show me example.
Ok thanks you,
maybe I maked something wrong because I built a new model an it works.
But it is not very fine modify loads by this way.
Is there a possibility to delete or change value of a linear on edges load by the 3D view as we can do for ather kind of loads?
Is there a possibility to delete or change value of a linear on edges load by the 3D view as we can do for ather kind of loads?
Right hand mouse click on load symbol....
Problem is when I modify load value with RMB on load, it changes the value for all edges included in the list field of te table.
Not very usefull and dangerous
Thank you