Robot Structural Analysis Forum
Welcome to Autodesk’s Robot Structural Analysis Forums. Share your knowledge, ask questions, and explore popular Robot Structural Analysis topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Help file error?

6 REPLIES 6
SOLVED
Reply
Message 1 of 7
tony.ridley
720 Views, 6 Replies

Help file error?

Hi

 

Is this a typo?

link to help page:

http://docs.autodesk.com/RSA/2012/ENU/filesROBOT/GUID-FB3C86D3-0E30-43A6-82D6-6C50F429FA0-600.htm

 

 

Document1.jpg

 

Both descriptions are the same.

 

Cheers,  

6 REPLIES 6
Message 2 of 7
Rafal.Gaweda
in reply to: tony.ridley

Thx for pointing this out



Rafal Gaweda
Message 3 of 7

The correct settings for both NR methods are shown on the attached picture.



Artur Kosakowski
Message 4 of 7
PatrickEC
in reply to: tony.ridley

SIX months have passed, and the error is still there....

Message 5 of 7

Patrick,

 

We do our best to introduce as many corrections and improvements as possible but please note: Not all identified issues are considered significant enough to address in their entirety; a proposed correction may create significant stability risks; some issues may be impossible to fix due to product architectural restraints or can be introduced in a specific time frame only. Thank you for your understanding in this matter.

 

For this particular situation the analysis dialog clearly indicates which method is being used. In addition the results for Full NR and  Modified NR method are the same provided the analysis converges so the selection of the check boxes should not cause any issue for a user.



Artur Kosakowski
Message 6 of 7

I am afraid you will not convince me that not fixing just two sentences in the help for six months is justified. But I appreciate your explanation, it is certainly informative as to what pace of development can be expected in the future.

Message 7 of 7
Pawel.Pulak
in reply to: PatrickEC

Fixed in the online help.

See:

http://help.autodesk.com/view/RSAPRO/2015/ENU/?gui​d=GUID-FB3C86D3-0E30-43A6-82D6-6C50F429FA0D 

 

---------------------------------------------
If this post answers your question please click the "Accept as Solution" button. It will help everyone to find answer more quickly!

 

Regards,


Pawel Pulak
Technical Account Specialist

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report