Discussion Groups

Robot Structural Analysis

Reply
Mentor
faisal.aaouatif
Posts: 197
Registered: ‎10-08-2011
Accepted Solution

Group of walls

150 Views, 5 Replies
02-01-2013 11:07 AM

is there any way to create a entity grouping  two or more connected walls and treat them as single one , and extract all its geometrical caracteristics ( Section, Inertias , ... ) and reduced efforts ( without using cuts ).

Thank you

Please use plain text.
Valued Mentor
tony.ridley
Posts: 652
Registered: ‎09-07-2011

Re: Group of walls

02-03-2013 05:06 AM in reply to: faisal.aaouatif

Yes, using "core walls" option under geometry. You assign any given number of walls to a core wall group.  

 

To view results, go to results, diagrams for buildings, core walls.  

 

Bear in mind you need to have the storeys well defined as the core wall grouping relies on having nicely defined stories to run correctly.  

Please use plain text.
Product Support
Rafal.Gaweda
Posts: 4,930
Registered: ‎04-26-2010

Re: Group of walls

02-03-2013 11:48 PM in reply to: tony.ridley

IN case of properties modification you may griup them in standard group

 

group.jpg



Rafal Gaweda
Please use plain text.
Mentor
faisal.aaouatif
Posts: 197
Registered: ‎10-08-2011

Re: Group of walls

02-04-2013 12:54 AM in reply to: Rafal.Gaweda

Thank You Tony & Rafal ;

if i define a core wall composed from a series of wall ; is these walls need to be connected on there edges ?

By using API , can i extract reduced results ( M , V , T ) at the base of a core wall with the same way as for a simple or group of walls.

Thank you

 

Please use plain text.
Product Support
Rafal.Gaweda
Posts: 4,930
Registered: ‎04-26-2010

Re: Group of walls

02-04-2013 02:58 AM in reply to: faisal.aaouatif

if i define a core wall composed from a series of wall ; is these walls need to be connected on there edges ?

 

Yes, to get correct results.

 

By using API , can i extract reduced results ( M , V , T ) at the base of a core wall with the same way as for a simple or group of walls.

 

UNfortunately there is no API for core walls. You may use standard panels results or reduced ones.



Rafal Gaweda
Please use plain text.
Mentor
faisal.aaouatif
Posts: 197
Registered: ‎10-08-2011

Re: Group of walls

02-04-2013 03:09 AM in reply to: Rafal.Gaweda

Ok Thank VM

Please use plain text.