Discussion Groups

Robot Structural Analysis

Reply
Distinguished Contributor
Posts: 133
Registered: ‎08-03-2012
Accepted Solution

Export Steel Slap robot to Revit structure.

296 Views, 5 Replies
12-27-2012 04:30 AM

Hi all.

I is prolem.

I design slap RC, But why I not export Steel  of robot to revit strucutre ??

 

2012-12-27_1929.png

 

Please use plain text.
Product Support
Artur.Kosakowski
Posts: 4,258
Registered: ‎12-17-2010

Re: Export Steel Slap robot to Revit structure.

12-27-2012 04:38 AM in reply to: A.wikipedia
Please use plain text.
Distinguished Contributor
Posts: 133
Registered: ‎08-03-2012

Re: Export Steel Slap robot to Revit structure.

12-27-2012 04:44 AM in reply to: Artur.Kosakowski

Thank Artur.

But I don't kwon Artut write : " On the other hand you can export it to ASD Reinforcement and generated dwg drawings there which you can link with the Revit model."

I do not Export  ASD Reinforcement to Revit Modol???

 

Please use plain text.
Product Support
Artur.Kosakowski
Posts: 4,258
Registered: ‎12-17-2010

Re: Export Steel Slap robot to Revit structure.

12-27-2012 04:51 AM in reply to: A.wikipedia

It is not possible to directly export  reinforcement of slab generated in Robot to Revit but you may find the following solution helpful:

 

1. Generate slab reinforcement drawing in Robot

2. Open this drawing in ASD reinforcement and save it as dwg

3. Link this dwg file with the project in Revit



Artur Kosakowski
Please use plain text.
Distinguished Contributor
Posts: 133
Registered: ‎08-03-2012

Re: Export Steel Slap robot to Revit structure.

12-27-2012 05:19 AM in reply to: Artur.Kosakowski

Thank you.

But I do not use steel of revit structure.?????

Please see video.

http://www.screencast.com/t/ZBMO8OtzQZh

Thank again.

Please use plain text.
Product Support
Artur.Kosakowski
Posts: 4,258
Registered: ‎12-17-2010

Re: Export Steel Slap robot to Revit structure.

12-27-2012 05:28 AM in reply to: A.wikipedia

As you linked the 2D dwg drawing you will not be able to generate a cross section using Revit tool that is intended for a 3D model. The cross section view should be created in ASD and saved in the same or as a separate dwg file (that you link to Revit).



Artur Kosakowski
Please use plain text.