Discussion Groups

Robot Structural Analysis

Reply
Contributor
JIHADTM
Posts: 14
Registered: ‎11-14-2011
Accepted Solution

Design of core wall by using robot

1092 Views, 9 Replies
08-27-2012 05:21 AM

Kindly, I need the methodolgy of using robot for design of core wall

Please use plain text.
Product Support
Artur.Kosakowski
Posts: 4,717
Registered: ‎12-17-2010

Re: Design of core wall by using robot

08-29-2012 02:06 AM in reply to: JIHADTM

Assuming you want to calculate reinforcement there are two options:

 

1. Use RC Panels Reinforcement module

2. Use RC Wall reinforcement module (currently available codes are BAEL, EC2 and ACI).

 

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.



Artur Kosakowski
Please use plain text.
Mentor
stroxy
Posts: 183
Registered: ‎12-06-2011

Re: Design of core wall by using robot

08-29-2012 06:01 AM in reply to: Artur.Kosakowski

Is shear wall design for EC2 now enabled in Robot?

Please use plain text.
Product Support
Artur.Kosakowski
Posts: 4,717
Registered: ‎12-17-2010

Re: Design of core wall by using robot

08-29-2012 06:04 AM in reply to: stroxy

Yes, it is for French NAD.

 

NF EN.PNG

 

 



Artur Kosakowski
Please use plain text.
Valued Contributor
saclovitzky
Posts: 99
Registered: ‎10-12-2011

Re: Design of core wall by using robot

09-17-2012 07:37 AM in reply to: Artur.Kosakowski

 

Hello Artur

 

 

 

 

 

"Assuming you want to calculate reinforcement there are two options:

 

1. Use RC Panels Reinforcement module

 

   - How will I view the reinforcement maps for the walls?

 

2. Use RC Wall reinforcement module (currently available codes are BAEL, EC2 and ACI)."

 

 

 

 

 

Please use plain text.
Product Support
Rafal.Gaweda
Posts: 5,048
Registered: ‎04-26-2010

Re: Design of core wall by using robot

09-17-2012 08:00 AM in reply to: saclovitzky
RAmon

 

 

1. Use RC Panels Reinforcement module

 

   - How will I view the reinforcement maps for the walls?

 

The same as for panels \ slabs required reinforcement module \ maps.

 



Rafal Gaweda
Please use plain text.
Mentor
stroxy
Posts: 183
Registered: ‎12-06-2011

Re: Design of core wall by using robot

09-17-2012 08:57 AM in reply to: Rafal.Gaweda

I think I might have asked this question before, but does one  group the core walls by stories or is the core wall group the whole stack (i.e. over multiplie stories)?

Please use plain text.
Product Support
Rafal.Gaweda
Posts: 5,048
Registered: ‎04-26-2010

Re: Design of core wall by using robot

09-18-2012 01:15 AM in reply to: stroxy

As far as I understood you correctly - define core walls as a whole stack (but each wall not as a one panel - several panels from story to story level)

 

http://forums.autodesk.com/t5/Autodesk-Robot-Structural/Core-walls-results/m-p/3446505/highlight/tru...



Rafal Gaweda
Please use plain text.
Mentor
stroxy
Posts: 183
Registered: ‎12-06-2011

Re: Design of core wall by using robot

09-18-2012 01:53 AM in reply to: Rafal.Gaweda

Thanks, If I understand correctly, the core wall is defined by selecting all the panels making up the core wall (eg. C-, or L- shaped) over multiple levels and defining all these as 1 core wall 

Please use plain text.
Product Support
Rafal.Gaweda
Posts: 5,048
Registered: ‎04-26-2010

Re: Design of core wall by using robot

09-18-2012 02:01 AM in reply to: stroxy

Exactly !



Rafal Gaweda
Please use plain text.