Robot Structural Analysis Forum
Welcome to Autodesk’s Robot Structural Analysis Forums. Share your knowledge, ask questions, and explore popular Robot Structural Analysis topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Convert Robot files to Sap2000

12 REPLIES 12
SOLVED
Reply
Message 1 of 13
PedroBiel
6844 Views, 12 Replies

Convert Robot files to Sap2000

I am being asked to convert Robot files to SAP2000 but I don't find any way to do it. Please, does anybody know if it is possible?

Thank you.

12 REPLIES 12
Message 2 of 13
Rafal.Gaweda
in reply to: PedroBiel

From ARSA not possible.

Maybe third party software or SAP converter if exists or write your own usign Robot API or basing on str file.



Rafal Gaweda
Message 3 of 13
PedroBiel
in reply to: Rafal.Gaweda

Thank you very much for your quick answer.

Message 4 of 13
40ushek
in reply to: PedroBiel
Message 5 of 13
Artur.Kosakowski
in reply to: 40ushek

In other words Robot to Revit followed by Revit to ETABS Smiley Happy



Artur Kosakowski
Message 6 of 13

In other words Robot to Revit followed by Revit to ETABS

 

http://www.csiberkeley.com/csixrevit



Rafal Gaweda
Message 7 of 13
PedroBiel
in reply to: Rafal.Gaweda

I thank you all.

 

The point is we don't have Revit. We are just using ARSAProfessional and our client wish to add our calculation model to his SAP2000 model.

 

Message 8 of 13
40ushek
in reply to: PedroBiel

Sheldon? Is that u? Sheldon Cooper? 🙂

Give me ur model, Im try do it. If ur wish!



Message 9 of 13
PedroBiel
in reply to: 40ushek

No, I'm not Sheldon. Sheldon is the guy who seats by my side. How did you know that?

I give you one of the simplest models for a try, thank you.

PS: By the way. How can I show an avatar picture in the posts (like your bridge)?

Message 10 of 13
40ushek
in reply to: PedroBiel

Im home!

probably it works.

Message 11 of 13
PedroBiel
in reply to: 40ushek

I see you have converted the files via Revit but we don't have Revit.


I have tried saving as CIM Steel (CIS/2) (*.stp), that works with SAP200 but only with the geometry, neither with loads nor with combinations.

Message 12 of 13
mohamed.agrody
in reply to: 40ushek

excuse me

first thanks for the tip ,and I would like to know if it is a straight forward procedure or there are cetain settings I must choose for it to work?

I only have knowledge in sap2000 that is why I am converting a robot model and it is my first time using both robot and rivet

so any help is highly appreciated

 

Message 13 of 13
PedroBiel
in reply to: mohamed.agrody

So far I did not succeed.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report