Discussion Groups

Robot Structural Analysis

Reply
Active Member
Posts: 8
Registered: ‎03-13-2012
Accepted Solution

Code Group Verification Vs. Member Verification

396 Views, 3 Replies
10-19-2012 09:19 AM

There seems to be some inconsistency in the results between a member verification and a code group verification where the group only contains one member. See attached screenshots and calc. notes.

It looks like Robot for some reason changes the S275 material used in the member verification to some arbitrary material with a fy = 120 MPa in the code group verification.

 

Can someone explain if I’m doing something wrong here?

Please use plain text.
Active Member
Posts: 8
Registered: ‎03-13-2012

Re: Code Group Verification Vs. Member Verification

10-19-2012 09:20 AM in reply to: 20086033
Please use plain text.
Product Support
Artur.Kosakowski
Posts: 4,290
Registered: ‎12-17-2010

Re: Code Group Verification Vs. Member Verification

10-21-2012 11:27 PM in reply to: 20086033

Please make sure you have the correct material set in the group definition dialog.

 

group material.PNG

 

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.



Artur Kosakowski
Please use plain text.
Active Member
Posts: 8
Registered: ‎03-13-2012

Re: Code Group Verification Vs. Member Verification

10-22-2012 02:54 AM in reply to: Artur.Kosakowski

Thank you for the quick response. That helped.

 

The code group was created through the API and apparently the material of the member is not set as default and you need to define it explicit.

 

Cheers

Please use plain text.