cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Calcul des murs en béton armé selon la norme NF EN 1998-1

Calcul des murs en béton armé selon la norme NF EN 1998-1

Le module de ferraillage des murs en béton armé n'intègre pas la norme EN 1998-1. Il serait bon d'y songer car à compter du 01/01/2014 tous les projets devront être impérativement calculés à l'Eurocode 8 en France.

 

Dans les structures contreventées par des murs en béton armé, lorsque ceux-ci sont nombreux, il est souvent difficile de procéder à une étude exhaustive du système de contreventement. La réalisation d'une coupure pour obtenir les efforts réduits en pied de chaque mur pour son calcul en flexion composée est laborieuse lorsque le projet comprend une multitude de murs.

 

Il pourrait être imaginer une réprésentation graphique indiquant les voiles nécessitant un renforcement. En effet, compte tenu des dispositions constructives minimales (clause 5.4.3.5.3(4) NF EN1998-1/NA), il est alors possible de déterminer une capacité résistante du mur à la flexion composée (Mrd, Vrd, Nrd). On compare sa valeur résistante à sa valeur sollicitante sous combinaisons d'actions sismiques. Si Mrd < Med alors un renforcement des chaînages d'extrémités est nécessaire et peut-être visualisé par une code couleur (ex: rouge si il est sa capacité résistante n'est pas satisfaite).

 

Vincent LE LANN
SERBA (www.serba.net)

vlelann@serba.fr

2 Comments
PatrickSt-Louis5310
Enthusiast

Hi, it's been a long time that we are waiting for team developpement to improve the abality of ARSA pro, to perform real seismic analysis of RC  Shear, for major codes design such as EC8, ACI and CSA A23.3, actually users of ARSA must search the solution by buying other tools or softwares made by other editors and unfortunatly, they are not provided the full solution for all the codes.They were an hope with Altiscad Intellishape but this company seems to be diseaper with this powerfull tools, instead of Intellishape we found that two products on which team developpment of ARSA can take some ideas to finally make this dream come to reality:

 1-Design wall Expert  made by PROEKSOFT which are perform the Design of RC Shear wall only for EC8

 2-S-Concrete of SOFTEK wich unfortunnatly are doing it only for North American Codes (ACI and CSA : A23.3)

 3- ECtools - Eurocodes Seismic Design a powerfull Greek Tool for Design and Analysis for RC et Masonry sections for EC2 and EC8 with bidirectional link only for SCIA pro Engineer and  CSI ETABS

4-ETABS 2013 which some important improvments have been made for Design and analys check have been added recently for the design and analysis for RC shear wall for various codes and various hape.

5-Ram structural system which perform RC-shear wall design and analysis for gravity, wind and seismic loads for only USA & british standards

 

Those improvement for the four products can be visualised by clicking in the following links :

 

1- http://www.youtube.com/watch?v=x3ZcMWmfSe8

2 -http://www.youtube.com/watch?v=_KUDJfEF5QU

3- http://www.ectools.eu/

4-http://www.youtube.com/watch?v=_fMesxyzaFo

5-http://www.youtube.com/watch?v=JZUxO7qkRws

 

Based on this review, I think that ARSA team Developpment will find some ideas to complete this module asap

 

with best regards

 

Patrick Saint-Louis

philip.s
Alumni
Status changed to: Gathering Support
prior status deleted, setting to default

Can't find what you're looking for? Ask the community or share your knowledge.

Submit Idea  

Autodesk Design & Make Report