Robot Structural Analysis Forum
Welcome to Autodesk’s Robot Structural Analysis Forums. Share your knowledge, ask questions, and explore popular Robot Structural Analysis topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Beam Reinforcement Detailing: Shapes

11 REPLIES 11
SOLVED
Reply
Message 1 of 12
stroxy
1367 Views, 11 Replies

Beam Reinforcement Detailing: Shapes

Hello, How do I set my reinforcement pattern in the beam design module to only generate hooks at the extreme end supports?

11 REPLIES 11
Message 2 of 12
jad.dellel
in reply to: stroxy

Hi Stroxy!

Which Rc code do you use ?

-----------------


Jad DELLEL
Sustainability Success Manager - Autodesk, Inc.

Message 3 of 12
stroxy
in reply to: jad.dellel

Eurocode 2 (Eurocode 8 for seismic)

Message 4 of 12
jad.dellel
in reply to: stroxy

If hooks aren't generated, you can try to switch off the Hooks, only if necessary option:
Hooks.png
-----------------


Jad DELLEL
Sustainability Success Manager - Autodesk, Inc.

Message 5 of 12
stroxy
in reply to: jad.dellel

Hooks are generated on both ends of the bar.  I only want the hooks at the extreme supports and a regular lap splice (no hooks) within the span

Message 6 of 12
jad.dellel
in reply to: stroxy

Can you upload your rtd file please?

-----------------


Jad DELLEL
Sustainability Success Manager - Autodesk, Inc.

Message 7 of 12
stroxy
in reply to: jad.dellel

please find uploaded file attached

Message 8 of 12
jad.dellel
in reply to: stroxy

Stroxy, can you send us only your RC beam?

The file you attached before contains all the model without any RC beam calculated.

 

-----------------


Jad DELLEL
Sustainability Success Manager - Autodesk, Inc.

Message 9 of 12
jad.dellel
in reply to: jad.dellel

Stroxy,

 

It should work as you excpect if you Switch to single span

 

RC_pattern.png

-----------------


Jad DELLEL
Sustainability Success Manager - Autodesk, Inc.

Message 10 of 12
stroxy
in reply to: jad.dellel

Thanks Jad

Message 11 of 12
Artur.Kosakowski
in reply to: stroxy

Stroxy,

 

Please download and install SP1 for Robot 2014 which includes some improvements in that area.



Artur Kosakowski
Message 12 of 12
stroxy
in reply to: Artur.Kosakowski

Thanks Artur

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report