Решения Autodesk Simulation – Русский – только для чтения
Русскоязычное сообщество Autodesk Simulation! В данном разделе вы найдете ответы на вопросы о CFD, Inventor Nastran, MoldFlow, Netfabb, Robot Structural Analysis, Helius ит.д.
отмена
Отображаются результаты для 
Показать  только  | Вместо этого искать 
Вы имели в виду: 

Хэлп по командной строке

9 ОТВЕТ 9
РЕШЕНО
Ответить
Сообщение 1 из 10
Bauskas
1646 просмотров, 9 ответов

Хэлп по командной строке

Был бы признателен хоть за какую-нибудь информацию о том, как пользоваться командной строкой в Robot Structural Analysis.

Старые мануалы Robot97 описывают только текстовый формат.

9 ОТВЕТ 9
Сообщение 2 из 10
Romanich
в ответ: Bauskas

Командной строки как в AutoCAD в Robot Structural Analysis нет.

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.

Roman Zhelezniak

Robot Evangelist & Passionate Civil Structural Engineer

LinkedIn | Robot & Хобот | App Store for Robot
EESignature


Сообщение 3 из 10
Bauskas
в ответ: Romanich

Это хелпа в нем нет. Командная строка - есть

 

 

Автокад тут ни при чем.

Сообщение 4 из 10
Romanich
в ответ: Bauskas

Этот рудимент, который вызывается в контекстном меню таблицы нагрузкок, трудно назвать командной строкой.

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.

Roman Zhelezniak

Robot Evangelist & Passionate Civil Structural Engineer

LinkedIn | Robot & Хобот | App Store for Robot
EESignature


Сообщение 5 из 10
Bauskas
в ответ: Romanich

И тем не менее этот рудимент так называется.

 

Ладно. Что написал, что в окно посмотрел. Пойду подпишу ургентный случай в техподдержку.

Сообщение 6 из 10
Simonoff
в ответ: Bauskas

надеемся увидить ответ от лица тех поддержки и опубликованый вами в этой теме

Сообщение 7 из 10
Pawel.Pulak
в ответ: Bauskas

Sorry for writing in English again:)

Robot Command line is using the syntax of text file.

For instance when it is opened from the table of nodes the syntax:

1 0 0 0
2 1.5 0 0
3 4.6 0 0
ele
1 1 2
2 2 3

will result in generation of 3 nodes and the chain of 2 bars between them (Keyword "nodes" is not necessary when command line window is opened from the table of nodes). Move to new line during input is obtained by Ctrl+Enter.

Hope this helps.

 

Regards,

 

 


Pawel Pulak
Technical Account Specialist
Сообщение 8 из 10
Bauskas
в ответ: Bauskas

Pawel,

English is OK, thank you.

 

What I am trying to figure out is if it's possible to modify the existing loads or add loads to the existing cases.

The key is 'existing' here because the parser yields syntax errors in return to my efforts to define a new load within an existing load case.

Сообщение 9 из 10
Pawel.Pulak
в ответ: Bauskas

Hello,

unfortunately using Robot command line you can add new load case and you can add new loads to them. You cannot modify loads or add loads to existing load cases.

The syntax

loa
cas #4 DL4
ele
2 pz=-11

used in the table of nodes or bars, or the syntax

cas #4 DL41
ele
2 pz=-11

used in the table of loads will results in the definition of a new load case number 4 with name DL4 and uniform vertical load applied to bar 2 in it. If you want to use  this functionality for modification modification it is necessary to delete load case or load earlier.

Generally Robot command line has the limitations similar to text file - including not supporting new types of loads, code parameters of bars etc.

For modification purposes Copy&Paste to/from MS Excel seems more suitable.

 

Regards


Pawel Pulak
Technical Account Specialist
Сообщение 10 из 10
Bauskas
в ответ: Pawel.Pulak

Thanks Pawel.

 

Taking these restrictions into account, I think it will be better to invest time into learning API anyway.

Не нашли то, что искали? Задайте вопросы в сообществе или поделитесь своими знаниями.

Новая тема  

Autodesk Design & Make Report