Revit Structure

Reply
Contributor
mgomaa
Posts: 21
Registered: ‎09-02-2012
Message 1 of 4 (745 Views)
Accepted Solution

Problem in creating Walls

745 Views, 3 Replies
10-02-2012 05:23 AM

When creating a partition wall, the following messages appeared:

 

" Highlighted walls overlap. One of them may be ignored when Revit finds room boundaries. Use Cut Geometry to embed one wall within the other."  or

 

" None of the created elements are visible in 3D View: {3D} View. You may want to check the active view, its Parameters, and Visibility settings."

 

What`s the problem ?:smileyindifferent:

 

 

 

*Expert Elite*
CADastrophe
Posts: 3,118
Registered: ‎08-28-2009
Message 2 of 4 (741 Views)

Re: Problem in creating Walls

10-02-2012 06:35 AM in reply to: mgomaa

Sounds like a simple visibility issue. Likely causes are:

 

  • The Walls Category is turned off.
  • A View FIlter under V/G is turning the Wall off.
  • The current Workset is turned off.
  • View Range: Cut Plane is above the Wall.

See if any of the above is the cause. If not, just reply back.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Active Contributor
5kings
Posts: 37
Registered: ‎09-27-2012
Message 3 of 4 (736 Views)

Re: Problem in creating Walls

10-02-2012 07:26 AM in reply to: mgomaa

A partition wall is a non-bearing wall. So it won't show up in your default 3D view... or in nother views with it;s discipline on Structural. Change the disipline of the the view, or the structural usage of the wall.

 

Regards Jordi

Contributor
mgomaa
Posts: 21
Registered: ‎09-02-2012
Message 4 of 4 (723 Views)

Re: Problem in creating Walls

10-03-2012 03:27 AM in reply to: 5kings

Thanks Jordi , Problem solved :smileyhappy:

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube