Revit Structure

Active Contributor
Posts: 34
Registered: ‎12-20-2010
Message 1 of 2 (216 Views)

Column Cut and Join

216 Views, 1 Replies
01-21-2012 04:08 AM

HI.. All...

If we use the slope slab and try to attach the top of the column with the slab, I t wil not attach perfectly. I can not find the column top edge is pefectly with the slab bottom. If slab is inclined then cloumn top edge should be inclined. But it comes as a horizontal.


Thank you

Posts: 5
Registered: ‎05-31-2011
Message 2 of 2 (195 Views)

Re: Column Cut and Join

01-24-2012 07:33 AM in reply to: bparmar900

Hi, maby i dont understand correctly....but..


I will give you my "work-around' which i use....


De-attach the top of column and rather give is an top off-set... to intersect the slab 


Then create an reference plane at the bottom of the slab...


Cut the column geometry by reference line...


Concrete columns can be joined... unless the materials are not the same...


Hope this could help you...


See attachements...

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community

Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit