2D Frame Analysis with extension

[brettl]

HI,

  I using revit structure 2013 with the static analysis of frame in the extensions. I can get the loads into show in the frame analysis tables. The load combinations are visible. In the loads tab, there no loads.  I get the self weight load.

But I do not get the point loads from Revit. What am I doing wrong.

Thanks

Brett Lewis

[fernanda.firman]

Kevin Dolley, from our user experience team suggest on our wikihelp:

If you enable the visibility of dimensions in your analytical view, you can use the dimension to place the point load with more precision.

Likewise, you can enable the visibility of structural framing elements in the analytical view to allow the loads to snap to the physical model when placed.

Hope taht helps.

[brettl]

Sorry, I did not explain what the issue is. I can not get the loads to transfer from the revit model to the static analysis of frame extension. The loads show in the revit model, but the loads from the revit model do not show up in the loads table in static analysis of frames. The first picture is from revit with a horizontal force (point load 1 type) wind1. The next pictures are from the static analysis of frames extension. Note that there are no reactions or displacements due to the wind1 load. What am I missing?

Thanks
Brett




[cid:image001.jpg@01CE507C.41ABFBC0]
[cid:image003.jpg@01CE507D.8BF534C0]



[cid:image007.jpg@01CE507D.8BF534C0]
[cid:image008.jpg@01CE507D.8BF534C0]
[cid:image009.jpg@01CE507D.8BF534C0]

________________________________
This electronic message and any attached files contains information which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.

If you have received this electronic transmission in error, please notify us by telephone (+1-719-593-7848) or by electronic mail (it@neumannsystemsgroup.com) immediately.