Revit MEP

Reply
Valued Contributor
bvm76
Posts: 56
Registered: ‎09-10-2013
Message 1 of 6 (461 Views)
Accepted Solution

cable tray connector

461 Views, 5 Replies
11-18-2013 04:38 AM

i am trying to make a cable tray fitting but i can't figure out why the cable tray connector is not in line with the face of the tray that i selected. the width is fine and the height is the problem. Please see attached.

*Expert Elite*
CADastrophe
Posts: 3,118
Registered: ‎08-28-2009
Message 2 of 6 (433 Views)

Re: cable tray connector

11-18-2013 06:39 AM in reply to: bvm76

Can you attach the Family file? Also, what version of Revit are you using?

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Valued Contributor
bvm76
Posts: 56
Registered: ‎09-10-2013
Message 3 of 6 (425 Views)

Re: cable tray connector

11-18-2013 07:47 AM in reply to: CADastrophe

please see attached.

 

i am using revit 2013.

Valued Contributor
EnlInt
Posts: 84
Registered: ‎03-20-2012
Message 4 of 6 (418 Views)

Re: cable tray connector

11-18-2013 08:16 AM in reply to: bvm76
It has to do with that the connector is connected to the U-shaped face. It connects to the center of gravity of the face. Solution is to connect it to a workplane or alternatively create a (small) object were you can connect your connector to. This object with connector can than be located/placed in the right spot. In your case I would go for workplane based connector.
*Expert Elite*
CADastrophe
Posts: 3,118
Registered: ‎08-28-2009
Message 5 of 6 (408 Views)

Re: cable tray connector

11-18-2013 08:58 AM in reply to: bvm76

Too add to EnlInt's suggestion of creating a dedicated extrusion to host the Connector: you can disable that extrusion's Visibility  and the Connector will still be available. Alternatively, you can create the core extrusion as a solid bar and use a Void Extrusion to carve our the cavity, which will leave the connector centered on the face.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Valued Contributor
bvm76
Posts: 56
Registered: ‎09-10-2013
Message 6 of 6 (371 Views)

Re: cable tray connector

11-20-2013 09:06 AM in reply to: CADastrophe
I created a solid sweep with the same width and height as the U-face tray and it works. Thanks guys!

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube