Revit MEP

Reply
Contributor
RJServoss
Posts: 11
Registered: ‎07-14-2011
Message 1 of 4 (264 Views)
Accepted Solution

Transfer Grilles

264 Views, 3 Replies
01-27-2014 09:04 AM
How do you all set up transfer grilles? When I use an air terminal family on either end of the transfer, typically air terminals have their flow set to preset, and having both ends of the system set to preset results in an error. If I use a modified end cap family to represent both ends of the transfer, I don't get any errors or warnings, but I also don't get an air terminal family that can be scheduled with the other air terminals. I have created an air terminal family with the flow configuration set to calculated for the sole purpose of handling transfers, but am not all that happy with this set up. How do you all handle transfer grilles?
Product Support
Alaaeldin_Alsahli
Posts: 152
Registered: ‎11-19-2013
Message 2 of 4 (212 Views)

Re: Transfer Grilles

01-29-2014 10:44 AM in reply to: RJServoss

this link may help

http://forums.augi.com/showthread.php?122490-Transfer-Grilles

let me know what do you think about it



Alaaeldin Alsahli


Please mark Accept as Solution if your question is answered. Kudos gladly accepted. ⇘
Contributor
RJServoss
Posts: 11
Registered: ‎07-14-2011
Message 3 of 4 (208 Views)

Re: Transfer Grilles

01-29-2014 10:55 AM in reply to: RJServoss
The solution proposed in that forum is exactly how I already handle the issue. If that's the best option, then that's what I'll continue to do, but I was really hoping to hear some other options to see if there is a better way of doing it.

Rick Servoss, PE, LEED AP BD+C l Associate
LORING Consulting Engineers
1130 Connecticut Ave., NW, Suite 750, Washington, DC 20036-3915
Direct: 202.742.1464 l Main Office: 202.296.6583 l Fax: 202.296.6953
Email: rservoss@loringengineers.com l Visit us: www.loringengineers.com
[cid:image002.jpg@01CF1CF9.BD8ECAC0]
Product Support
Alaaeldin_Alsahli
Posts: 152
Registered: ‎11-19-2013
Message 4 of 4 (190 Views)

Re: Transfer Grilles

01-30-2014 08:39 AM in reply to: RJServoss

then give me time and i will try to figure out something



Alaaeldin Alsahli


Please mark Accept as Solution if your question is answered. Kudos gladly accepted. ⇘

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube