Revit MEP

New Member
Posts: 1
Registered: ‎10-03-2012
Message 1 of 2 (647 Views)
Accepted Solution

Revit 2013 How to add a 2" insulation to the duct?

647 Views, 1 Replies
10-03-2012 06:49 AM



Please advise on how to cover the duct with 2" insulation.


Thank you.

*Expert Elite*
Posts: 2,941
Registered: ‎08-28-2009
Message 2 of 2 (626 Views)

Re: Revit 2013 How to add a 2" insulation to the duct?

10-04-2012 07:17 AM in reply to: omileyko

It should be as simple as selecting the Duct or Duct Run (highlight a section of Duct and press 'Tab') and clicking the 'Add Insulation' tool located on the 'Modify" contextual tab. The following dialog box will prompt for thickness. See image below.



Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community

Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit