Revit MEP

Reply
Active Member
aniket_aam
Posts: 10
Registered: ‎08-10-2011
Message 1 of 19 (3,282 Views)

Query for pipe supports or hangers in Revit Mep

3282 Views, 18 Replies
09-27-2011 11:48 PM

Dear all,

 

I have one query about Revit Mep. How to make pipe supports or hangers in Revit Mep ?

 

Regards,

Aniket Manjrekar

Valued Mentor
julianjameson8403
Posts: 457
Registered: ‎06-16-2010
Message 2 of 19 (3,274 Views)

Re: Query for pipe supports or hangers in Revit Mep

09-28-2011 02:27 AM in reply to: aniket_aam

You could create some generic model families to deal with this. I would also create a sub-category for the linestyles and solids to improve visiblity control in your views.

 

Alternatively (depending on how you are using Revit) - rather placing hundreds of hanger families you could create detail views and indicate the hangers using 2D linework.

If my reply answers your query, please use the Accept as Solution.
Please give Kudos as appropriate to enhance the value of these forums.

Thank you!
Active Member
aniket_aam
Posts: 10
Registered: ‎08-10-2011
Message 3 of 19 (3,268 Views)

Re: Query for pipe supports or hangers in Revit Mep

09-28-2011 03:22 AM in reply to: julianjameson8403

I agreed with your second option but i want to try it in Revit 3D itself. I can make it in 2D detailed view, there is no any issue.

 

Regards,

Aniket Manjrekar

Valued Mentor
julianjameson8403
Posts: 457
Registered: ‎06-16-2010
Message 4 of 19 (3,265 Views)

Re: Query for pipe supports or hangers in Revit Mep

09-28-2011 03:24 AM in reply to: aniket_aam

Then Option 1 will be the way to do it

If my reply answers your query, please use the Accept as Solution.
Please give Kudos as appropriate to enhance the value of these forums.

Thank you!
Active Member
aniket_aam
Posts: 10
Registered: ‎08-10-2011
Message 5 of 19 (3,263 Views)

Re: Query for pipe supports or hangers in Revit Mep

09-28-2011 03:36 AM in reply to: julianjameson8403

Ok.

But how to do it ? Because I am trying so hard but not getting any result finally and I can not rest support directly on pipes like any connector. Can you suggest me any idea to do it ?

Valued Mentor
julianjameson8403
Posts: 457
Registered: ‎06-16-2010
Message 6 of 19 (3,261 Views)

Re: Query for pipe supports or hangers in Revit Mep

09-28-2011 04:11 AM in reply to: aniket_aam

What have you done so far?

Have you created support families? If so how?

To place them you will have to place them manuallynot automatically.

If my reply answers your query, please use the Accept as Solution.
Please give Kudos as appropriate to enhance the value of these forums.

Thank you!
Active Member
aniket_aam
Posts: 10
Registered: ‎08-10-2011
Message 7 of 19 (3,257 Views)

Re: Query for pipe supports or hangers in Revit Mep

09-28-2011 04:17 AM in reply to: julianjameson8403

Yes. I am working on that, give today tomarrow i can show you what i have made.

ok.

Active Member
aniket_aam
Posts: 10
Registered: ‎08-10-2011
Message 8 of 19 (3,251 Views)

Re: Query for pipe supports or hangers in Revit Mep

09-28-2011 05:39 AM in reply to: aniket_aam

Dear,

 

I have attached pipe support family image for your reference and I have taken Metric plumbing fixtures template. Now i just need to place the supports on pipes automatically with their respective sizes. Kindly help me.

 

Regards,

Aniket Manjrekar

New Member
kevlar016
Posts: 2
Registered: ‎10-05-2011
Message 9 of 19 (3,187 Views)

Re: Query for pipe supports or hangers in Revit Mep

10-07-2011 10:58 AM in reply to: aniket_aam

I also need some Pipe and Duct hangers. Where can i get a Unistrut hanger for Revit MEP? It is kinda bogus that this program doesnt have these out of the box since you need them for basically every mechanical job...

New Member
RalphMounzer
Posts: 1
Registered: ‎12-19-2011
Message 10 of 19 (3,055 Views)

Re: Query for pipe supports or hangers in Revit Mep

12-19-2011 11:45 PM in reply to: aniket_aam

Here is a nice Revit plugin that automaticaly distributes support elements for ducts and pipes.

http://partnerproducts.autodesk.com/popups/product.asp?rdid=GBLB1356&prodid=GBP09703&id=26794

and here is a youtube video as well

http://www.youtube.com/watch?v=y4IIx8lTCv8

Hope it helps. 

 

 

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube