Revit MEP

Reply
Member
K_Capehart
Posts: 3
Registered: ‎09-17-2012
Message 1 of 6 (300 Views)

Parking Garage RCP view range

300 Views, 5 Replies
09-17-2012 08:40 AM

I am an electrical drafter for an MEP firm and I have been tasked with making the parking spaces show up on the lighting plans? Does anyone know if it is possible to adjust the view range in order to make this happen, and if so could you please share that information with me?

 

Thanks

Valued Contributor
AnmarieJames8335
Posts: 79
Registered: ‎06-09-2010
Message 2 of 6 (298 Views)

Re: Parking Garage RCP view range

09-17-2012 08:49 AM in reply to: K_Capehart

Instead of adjusting the view range, you could set a parking layout plan as an Underlay (View Properties of the RCP). Make sure the Underlay Orientation is set to Plan.

Member
K_Capehart
Posts: 3
Registered: ‎09-17-2012
Message 3 of 6 (294 Views)

Re: Parking Garage RCP view range

09-17-2012 09:01 AM in reply to: AnmarieJames8335

The problem I have with changing the Underlay Orientation is that I am unable to see structural beams on the ceiling when I do that. I've never underlayed another plan before, can you go into a little more detail as to how I do that?

 

Thanks

Valued Contributor
AnmarieJames8335
Posts: 79
Registered: ‎06-09-2010
Message 4 of 6 (277 Views)

Re: Parking Garage RCP view range

09-17-2012 12:49 PM in reply to: K_Capehart

To use an underlay, in the View Properties of your RCP plan, under Graphics, go to Underlay. Choose the appropriate level from the dropdown. Underneath that, in Underlay Orientation, choose Plan.  You should see the floor plan items as well as your RCP items.

 

When I tried this, my columns stayed on, but I lost the walls. Everything was on in VG, so eventually I figured out that the Discipline settings (also under View Properties) were affecting the display. I had used architectural walls, which were turning off every time I set the Discipline to anything other than Arch or Coordination.  Once I set the Discipline of both views to Coordination, everything showed up.  So, you might have to tweak your VG settings, since changing the Discipline will probably affect display.

 

If I'm missing anything here, or if someone else has a more efficient way to do this, I'd love to hear it.

 

AJ

*Expert Elite*
CADastrophe
Posts: 3,149
Registered: ‎08-28-2009
Message 5 of 6 (273 Views)

Re: Parking Garage RCP view range

09-17-2012 01:06 PM in reply to: K_Capehart

We've had to do this same thing, but we've also had to do something similar in which we needed to show the stairs properly in the RCP. (Since your looking from the opposite direction, you see the underside of the stair, thus hiding the steps.)

 

Our solution was to create a separate Floor Plan View which only shows the desired Elements, and overlap the two Views on the Sheet. It's not the best of solutions, but it was a quick work-around for us.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Member
K_Capehart
Posts: 3
Registered: ‎09-17-2012
Message 6 of 6 (270 Views)

Re: Parking Garage RCP view range

09-17-2012 01:48 PM in reply to: AnmarieJames8335

Are you able to underlay specific views? I don't have that option. I can only underlay Levels.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube