Revit MEP

Valued Contributor
Posts: 86
Registered: ‎10-15-2012
Message 1 of 2 (466 Views)
Accepted Solution

Parametric vs non-parametric families

466 Views, 1 Replies
11-15-2012 08:14 AM



I fully appreciate the power of being able to create custom families that are fully parametric and the versatility this would bring to a project. However, depending upon the part this can become complex. Out of interest how many people create individual family types per part size required (if anyone) e.g. one rfa file per family size that you require meaning you would have 10 rfa files, each containing an individual part size that you require for a piece of plant vs the parametric method where you would have 1 rfa file set up so that you have full parametric control over numerous part sizes that you require. I understand that you would essentially have 10 files containing the same item but at different sizes.


I am currently creating a standard library of MEP parts so am curious which method people use, or a combination of the 2 depending on the complexity of the part.



Posts: 11
Registered: ‎04-08-2010
Message 2 of 2 (455 Views)

Re: Parametric vs non-parametric families

11-15-2012 11:42 AM in reply to: lsop1409

I'd say 99% of the time, it makes sense to build a parametric family, especially if the part retains the same overall shape and only grows in physical size based on the part/model number.  A parametric family really doesn't take much more time to build.  Even if the part varies in shape based on part/model number, there are ways to make the family parametric.  Plus, if you need to make a change to a family, do you want to make that change once or ten times?  On the other hand, it might not make sense to make a parametric family for a one-off/custom part that you may never use on another project.

Jason Seck
BIM Specialist
Henderson Engineers, Inc.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community

Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit