Revit MEP

Reply
Contributor
winstonarasu
Posts: 12
Registered: ‎01-07-2011
Message 1 of 3 (236 Views)
Accepted Solution

Need Help in Pipe Fitting Modification

236 Views, 2 Replies
01-23-2014 01:00 AM

Hi, I'm a beginer to lookup tables.. here I'm trying to create a custom pipe fitting that matches to the organisation standard.. i believe that i have linked the lookup tables properly to the pipe fitting.. I tested the parameters of the fitting and it changes properly in the family environment. so then i loaded the family in to the projet to test it with pipes. when i place the fitting on a pipe, the former one automatically asdjust itself to match the pipe size.. untill now there are No issues:smileywink: But when i try to change the pipe size along with the fitting in th eoptions bar (by tab selecting it), only the pipe size changes and the fitting doesn't change. it forms a erducer at the end..

 

i have attached the files for reference.. Please guide where does the mistake happen.

Active Contributor
danielkazado
Posts: 33
Registered: ‎10-07-2013
Message 2 of 3 (231 Views)

Re: Need Help in Pipe Fitting Modification

01-23-2014 01:21 AM in reply to: winstonarasu

Hi,

 

  Delete the formula for Nominal Radius (default)  parameter

  Write the formula   Nominal Radius * 2     for the  Nominal Diameter (default) parameter

 

  As the fitting connection uses Radius it works when you change pipe and fitting diameter same time. 

  Hope helps.

Daniel Kazado

Please use Accept as Solution if your question is answered.
You may Give Kudos if the answer is helpful.
Contributor
winstonarasu
Posts: 12
Registered: ‎01-07-2011
Message 3 of 3 (213 Views)

Re: Need Help in Pipe Fitting Modification

01-23-2014 04:11 AM in reply to: danielkazado

Thanks a Lot Daniel:smileyhappy: you saved my day..  it worked fine.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube