Revit MEP

Revit MEP

Active Contributor
Posts: 45
Registered: ‎12-12-2012
Message 1 of 2 (252 Views)
Accepted Solution

Listing equipment connected to an electrical circuit and/or panel

252 Views, 1 Replies
01-28-2013 02:27 PM

How can I create a list of electrical equipment and fixtures connected to a circuit and/or panel?

*Expert Elite*
Posts: 3,207
Registered: ‎08-28-2009
Message 2 of 2 (230 Views)

Re: Listing equipment connected to an electrical circuit and/or panel

01-29-2013 05:45 AM in reply to: ArynBergman

Go to View tab » Schedules ▼ Schedule/Quantities, and create an Electrical Circuits Schedule. In the following dialog box, select the desired fields (i.e. "Circuit Number", "Load Name"), but you must include the "Panel" field in order to filter the schedule to show only the circuits from that panel - under the Filter tab, set "Filter by:" to "Panel", equals, and enter the panel's name. This will report the Electrical Circuits that belong to that panel.


If you are aiming to list all of the individual elements that are connected to that Panel, I don't believe that you can in a single Schedule. You could list the elements of a single chosen Category (i.e. Electrical Fixtures) through the use of an Embedded Schedule to the Electrical Circuit Schedule.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.