Revit MEP Forum
Welcome to Autodesk’s Revit MEP Forums. Share your knowledge, ask questions, and explore popular Revit MEP topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Lighting Equipment Error

2 REPLIES 2
SOLVED
Reply
Message 1 of 3
GHASEM_ARIYANI
309 Views, 2 Replies

Lighting Equipment Error

 

 

hi all

 

When adding a light system warns Lighting Equipment.


How I solve?


What parameters should I modify?

 

Lighting Equipment Error.jpg

 

 

Lighting Equipment Error-2.jpg

 

 

 

Lighting Equipment Error-3.jpg

 

 

Please use " Accept as Solution", and give kudos as appropriate to further enhance these forums. Thank you!
2 REPLIES 2
Message 2 of 3
CoreyDaun
in reply to: GHASEM_ARIYANI

Your Panel is just not assigned to a Distribution System. Select your Panel and a pull-down will appear on the Options Bar (just below the Ribbon) which will allow you to select a valid Distribution System based on the data of the Primary Electrical Connector of the Panel. By default, newly placed Electrical Equipment is not assigned to a Distribution System, so this must be done manually.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Message 3 of 3
GHASEM_ARIYANI
in reply to: CoreyDaun

Thank you CADastrophe.

Please use " Accept as Solution", and give kudos as appropriate to further enhance these forums. Thank you!

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report