Revit MEP Forum
Welcome to Autodesk’s Revit MEP Forums. Share your knowledge, ask questions, and explore popular Revit MEP topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Heating and Cooling Loads Error

1 REPLY 1
SOLVED
Reply
Message 1 of 2
GHASEM_ARIYANI
6528 Views, 1 Reply

Heating and Cooling Loads Error

 

Hi


How do I solve the following warning:

 

 

 

1- Space 2 is not upper bounded by a roof, ceiling or floor element. This can result in incorrect adjacencies and voids in the analytical model. Please ensure that Upper Limit and Limit Offset for Space 2 is set correctly.

 

2- Plenum 8 has Space Type set to Plenum but has no ceiling surface.  A plenum must be separated from the space it serves by a ceiling.

 

Revit MEP Error.jpg

Please use " Accept as Solution", and give kudos as appropriate to further enhance these forums. Thank you!
1 REPLY 1
Message 2 of 2

 

Hi


I found the solution.

 

After reviewing the different Arrived at the conclusion:

 

When we Space Tools Use At the top of the room elements such as roof, ceiling or floor  Is placed.

 

I file architecture No one roof, ceiling or floor I was not draw of the elements.

 

But then draw ceiling and the MEP Reload this problem was solved.

 

Revit MEP Error2.jpg

 

 

 

 

Please use " Accept as Solution", and give kudos as appropriate to further enhance these forums. Thank you!

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report