Revit MEP

Valued Contributor
Posts: 56
Registered: ‎09-10-2013
Message 1 of 3 (184 Views)
Accepted Solution

Elevation Difference

184 Views, 2 Replies
10-03-2013 02:18 AM

What makes the elevation of a link Revit model different from the elevation of the host drawing? Please see attached.

New Member
Posts: 1
Registered: ‎10-03-2013
Message 2 of 3 (121 Views)

Re: Elevation Difference

10-03-2013 10:42 PM in reply to: bvm76

It's probably you have your level set to survey point and the link model is set to project base point or vice versa.

I don't currently have a revit machine right now so instruction may be a little bit off.


1. Click on the level and open the properties dialog box. 

2. On the property dialog box click "Edit Type".

3. Constraints-> Elevation Base -> Change Project Base Point to Survey Point or vice versa.



Valued Contributor
Posts: 56
Registered: ‎09-10-2013
Message 3 of 3 (99 Views)

Re: Elevation Difference

10-04-2013 12:38 PM in reply to: jdiala
Both are set to project base point.

I linked the revit file using center-center but when I change to origin-origin this solved the issue.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community

Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit