Revit MEP Forum
Welcome to Autodesk’s Revit MEP Forums. Share your knowledge, ask questions, and explore popular Revit MEP topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Duct text not lining up with duct that is not exactly north/south or east/west

1 REPLY 1
Reply
Message 1 of 2
dglenn9000
243 Views, 1 Reply

Duct text not lining up with duct that is not exactly north/south or east/west

If I have a duct that runs at a perfect 0,90,180,270 the duct tag works perfect but if the duct runs at an angle like 45 deg, the text stays perfectly horizontal and does not line up with the duct.

 

Any thoughts

1 REPLY 1
Message 2 of 2
CoreyDaun
in reply to: dglenn9000

Open the Tag Family for editing. Once open, there is a single checkbox option under Properties (with no elements selected) named "Rotate with component". Toggle that and load the Tag back into the Project.
Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report


Autodesk Design & Make Report