Revit MEP

Reply
Active Contributor
Paul-s
Posts: 29
Registered: ‎03-09-2011
Message 1 of 7 (423 Views)

Duct fitting question

423 Views, 6 Replies
01-22-2013 08:54 AM

Hi,

 

How would you draw this? What fittings do you use?duct fitting.png

New Member
cwclose
Posts: 2
Registered: ‎02-19-2012
Message 2 of 7 (409 Views)

Re: Duct fitting question

01-22-2013 11:22 AM in reply to: Paul-s

Depends if you're interested in the Revit systems aspect, but to model that you could use an in-place sweep family to create the top elbow (setting the category to duct fittings and adding a connector to the end) and another in-place family for the straight fitting with a normal transition duct fitting at the end of it.  (See Revit screenshot)Capture.JPG

Valued Contributor
Sandleaz
Posts: 88
Registered: ‎01-04-2012
Message 3 of 7 (401 Views)

Re: Duct fitting question

01-22-2013 11:58 AM in reply to: Paul-s

How would you draw this? What fittings do you use?

 

I start with big purple R --> new -> family and categorize it as a duct fitting (multi-port).  Then I model it.  I never use in-place families.    

Active Contributor
Paul-s
Posts: 29
Registered: ‎03-09-2011
Message 4 of 7 (392 Views)

Re: Duct fitting question

01-22-2013 12:18 PM in reply to: Paul-s

Ahh..So thats how you do it. I was going crazy looking for duct fittings. Thank you guys!

 

Cwclose. if the file is not too big. can you please attached that model so that I can study it.

New Member
cwclose
Posts: 2
Registered: ‎02-19-2012
Message 5 of 7 (367 Views)

Re: Duct fitting question

01-23-2013 06:34 AM in reply to: Paul-s

The file is too big for the Autodesk discussion groups.  I can send you the file via email or ftp.  That said, I agree with Sandleaz, if you can use a regular duct fitting family vs. in-place--do so.  However, if you're only needing the geometry (as is the objective of many MEP design and construction firms) and you aren't using the air flow data then modeling in-place might be quicker for unique circumstaces.  HTH

Member
kyuen
Posts: 3
Registered: ‎04-02-2013
Message 6 of 7 (280 Views)

Re: Duct fitting question

04-03-2013 08:08 AM in reply to: Paul-s

I am looking for this fitting also, can you send email to me also.

 

thank you.

New Member
dbrown-uskh
Posts: 2
Registered: ‎10-15-2013
Message 7 of 7 (146 Views)

Re: Duct fitting question

10-28-2013 02:13 PM in reply to: Paul-s

please send the duct file also  thanks

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube