Revit MEP

Reply
Contributor
wcrane
Posts: 21
Registered: ‎09-09-2004
Message 1 of 5 (543 Views)

Beveled Rectangular Taps

543 Views, 4 Replies
05-30-2006 09:22 AM
Would like to add this to my library. Anyone have some hints on the structure of the stock taps? Id use those as a start point.
Employee
martin.schmid
Posts: 1,297
Registered: ‎11-16-2005
Message 2 of 5 (543 Views)

Re: Beveled Rectangular Taps

06-12-2006 10:09 PM in reply to: wcrane
The default takeoff is defined in the file: C:\Documents and Settings\All Users\Application Data\Autodesk\Revit Systems\Imperial Library\Mechanical\Fittings\Rectangular Duct Takeoff.rfa.

You'll want to start with this family and start redefining the geometry to suit your requirements.

The reason you'd start with this family that it's settings (Settings Menu -> Family Category and Parameters) define how this family behaves.... whats up to you is do define the geometry... probably a solid blend between two rectangles.

HTH,
Martin Schmid
Autodesk Consulting


Martin Schmid, P.E.
Product Manager - Revit MEP
Architecture, Engineering, and Construction
Autodesk, Inc.

Employee
KyleB_Autodesk
Posts: 952
Registered: ‎10-21-2005
Message 3 of 5 (543 Views)

Re: Beveled Rectangular Taps

09-24-2007 03:02 PM in reply to: wcrane
I have a discussion about Beveled Rectangular Taps going on the AUGI forums, and I didn't want to shortchange all of you on the Autodesk forums, http://forums.augi.com/showthread.php?t=68220.

*********************
.....I figured I'd post a version of this takeoff that I helped build when I was in support.

This one has all sorts of bells and whistles, as I got engrossed with fixing it one afternoon, and my trig hand was strong that day.

It adheres to SMACNA standards OOTB (Takeoff Length = 0.25 * Duct Width, 4" Minimum), but allows you to override both the length and the angle if desired, so this is really all that you need. To accomplish this, there are a bunch of nested IF statements that drive the dimensions, have fun going through it if you'd like.

I actually forgot about this family until I saw this thread, now it's time to get it into the product.

Cheers,
Kyle B

P.S. As this is not an officially released piece of content, it has not been through our QA process. Therefore I cannot gaurantee its behavior on all cases.
******************


Kyle Bernhardt
Product Line Manager
Revit Services
Autodesk, Inc.

* user
Message 4 of 5 (543 Views)

Re: Beveled Rectangular Taps

09-25-2007 08:11 AM in reply to: wcrane
Very cool! Thank you for sharing/help build that part. This will come in
very handy.

I was actualy thinking about my need for this part just the other day.

Thank you again.

Kyle B [Autodesk] wrote:
> I have a discussion about Beveled Rectangular Taps going on the AUGI forums, and I didn't want to shortchange all of you on the Autodesk forums, http://forums.augi.com/showthread.php?t=68220.
>
> *********************
> ....I figured I'd post a version of this takeoff that I helped build when I was in support.
>
> This one has all sorts of bells and whistles, as I got engrossed with fixing it one afternoon, and my trig hand was strong that day.
>
> It adheres to SMACNA standards OOTB (Takeoff L
> ength = 0.25 * Duct Width, 4" Minimum), but allows you to override both the length and the angle if desired, so this is really all that you need. To accomplish this, there are a bunch of nested IF statements that drive the dimensions, have fun going through it if you'd like.
>
> I actually forgot about this family until I saw this thread, now it's time to get it into the product.
>
> Cheers,
> Kyle B
>
> P.S. As this is not an officially released piece of content, it has not been through o
> ur QA process. Therefore I cannot gaurantee its behavior on all cases.
> ******************
*Se7en
Message 5 of 5 (543 Views)

Re: Beveled Rectangular Taps

09-25-2007 08:15 AM in reply to: wcrane
Sorry about that, i was just trying out thunderbird. and i forgot to set
up my account; the previous was from me.

user@domain.invalid wrote:
> Very cool! Thank you for sharing/help build that part. This will come in
> very handy.
>
> I was actualy thinking about my need for this part just the other day.
>
> Thank you again.
>
> Kyle B [Autodesk] wrote:
>> I have a discussion about Beveled Rectangular Taps going on the AUGI forums, and I didn't want to shortchange all of you on the Autodesk forums, http://forums.augi.com/showthread.php?t=68220.
>>
>> *********************
>> ....I figured I'd post a version of this takeoff that I helped build when I was in support.
>>
>> This one has all sorts of bells and whistles, as I got engrossed with fixing it one afternoon, and my trig hand was strong that day.
>>
>> It adheres to SMACNA standards OOTB (Takeoff L
>> ength = 0.25 * Duct Width, 4" Minimum), but allows you to override both the length and the angle if desired, so this is really all that you need. To accomplish this, there are a bunch of nested IF statements that drive the dimensions, have fun going through it if you'd like.
>>
>> I actually forgot about this family until I saw this thread, now it's time to get it into the product.
>>
>> Cheers,
>> Kyle B
>>
>> P.S. As this is not an officially released piece of content, it has not been through o
>> ur QA process. Therefore I cannot gaurantee its behavior on all cases.
>> ******************

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube